Shroud and Cable Temporary Security For Weapon Safe
Shroud and Cable temporary security for a Weapon Safe when an installed Docking Station or Vehicle Fixing Kit is unavailable. Weapon Safe locked in a Shroud and Cable is as secure as being locked in an installed Docking Station or Vehicle Fixing Kit.
Unlock your Padlock leaving the Chain on the Shackle, then slide Padlock Guard between the Padlock Body and its Shackle. Then close the Padlock. When Padlock Guard is closed it STOPS a thief breaking it using either a Leverage, Hammer or Bolt Cutter Attack.
or any other non powered hand-held metal cutting tool.
Shroud and Cable
The Shroud and Cable is an Australian manufactured product designed specifically for the temporary security of a Weapon Safe when an installed Docking Station or a Vehicle Fixing Kit is unavailable.
Shroud and Cable - Steel Shroud
The Shroud and Cable - Steel Shroud is manufactured from 3mm thick Steel and powder coated black.
The Steel Shroud has four corner anchor points at the rear allowing the Steel Cable to be passed through to secure the Steel Shroud to a rigid item eg. a vehicle's boot hinge or the back of the front seat floor bracket. Both sides and the rear has numerous punched holes suitable for concealed fastening of the Steel Shroud to a flat surface if required.
The bottom of the Steel Shroud has high tensile m5x8mm clinch studs with shake proof washers and high tensile nuts to match the existing fastening holes of the Weapon SafeDocking Station, leaving additional holes for conventional fastening down of the Steel Shroud and Docking Station to a flat surface if required.
The clinch studs are attached to the bottom of the Steel Shroud by pressing them through the Steel under high pressure, making the bottom of the Steel Shroud smooth.
The advantage of this manufacturing technique is, having no nuts on the outside of the Steel Shroud ensures if a thief does break into a Vehicle with a Shroud and Cable there are no nuts they can undo to remove the Weapon Safe.
Shroud and Cable - Steel Cable
Supplied with the Steel Shroud is a 1.8 meter long spring coiled 10mm plastic coated 8mm oversized Steel Cable with an extra heavy duty four stage combination lock. The combination can be set by the purchaser.
NB: We supply 34% extra security by using 8mm oversized Steel Cable to secure the Weapon Safe/ Steel Shroud compared to Handgun legislation in the ACT (Australian Capital Territory) that specify the use of a 6mm Steel Cable to secure a Handgun in a Vehicle.
Shroud and Cable - the ULTIMATE SOLUTION
for temporary security for a
Weapon Safe
in a Vehicle and other temporary locations such as
in a Residential Home, Loan Car or Motel Room.
Where Can A Shroud and Cable Be Used
Suggested places where a Shroud and Cable can be used to temporarily secure the Weapon Safe:
Using a loaned or Company Vehicle.
Unavoidably having to leave a Weapon Safe for short periods of time in a Vehicle when, for whatever reason, a Vehicle Fixing Kit cannot be installed in that Vehicle.
Visiting a client at their office and having to leave your Weapon Safe unattended in their office.
At your work place when you have to leave your Weapon Safe unattended.
Staying away over night at a Motel / Hotel.
Staying overnight at a friends house.
Overnight in your Home when a Docking Station has not been installed there.
If you are renting a House or Apartment and you cannot install a Docking Station there.
In your Caravan or Motor Home.
Or any temporary location where there is something solid that the Steel Cable can be wrapped round and locked.
How To Fit The Steel Cable To The Steel Shroud
1.
Slide the Steel Cable through at least two of the four corner anchor points of the Steel Shroud.
2.
Loop one end of the Steel Cable around something solid and push it into the other end of the four stage combination lock and turn the four dials to lock it.
NB: You can set your own combination on the four stage combination lock.
Include file
3.
Slide the Weapon Safe into the Docking Station and lock it with the supplied Abloy PROTEC Key. All contents in the Weapon Safe are now secure.
Where To Secure The Shroud and Cable In A Vehicle
Wrap one end of the Steel Cable around the back of the front seat floor bracket and push it into the other end of the four stage combination lock and turn the four dials to lock it.
Wrap one end of the Steel Cable through the boot hinge and push it into the other end of the four stage combination lock and turn the four dials to lock it.
The Steel Cable can also be used to facilitate additional security of a brief case, suit case, tool box, camera case while carried in a Vehicle, Caravan or Motor Home.
Please Note
The price for the Shroud and CableDOES NOT INCLUDE a Docking Station. If you intend to install the Docking Station that is included with each Weapon Safe in your Residential Home, Office, Factory, Caravan or Motor Home and you also purchase a Shroud and Cable you will need to purchase another Docking Station to be bolted to the Shroud and Cable.
If this is the case select an additional Docking Station from our Price List / Secure Order Form. For your convenience, we will bolt the Docking Station to the Vehicle Fixing KitFREE OF CHARGE before it leaves our factory.
Recommended Security Products
Click link or picture to visit Web Site. Open in new window.
Designed to replace a Padlock and Mild Steel Chain.
Don't wait until your possessions are stolen.
What To Do Next...
Go to Price List / Secure Order Form for the cost of your investment to purchase a Weapon Safe and accessories and to place your order.
OR - Do you require a quotation and / or information sent to you? Go to Enquiry / Quotation Form.
OR - For further information about the Weapon Safe please contact us.
OR - Keep reading through this Web Site to learn about the Weapon Safe and WHY YOU MUST, for your own protection, ensure your Handgun / handguns are secure when left in your Vehicle.
Designed by:Internet Sales Design, Development and Marketing Company Since 1994
